Search
Products
    Menu Close

    HPS Initiator 4322

    Hernon® HPS Initiator 4322 is used to activate Hernon® Hernon Porosity Sealant (HPS) resins. HPS resins cures to form a thermoset polymer when exposed to elevated temperature. Thermal content and coefficient of thermal transfer in the workpieces influence the cure rate of the HPS system. Higher temperatures produce quicker cure rates. HPS resins generally cures within the range of 177oF (80oC) to 205oF (96oC). Proper cure requires the workpiece to uniformly attain full cure temperature. Parts that do not transfer heat well will required longer processing times. Efficient thermal conductivity yields shorter processing cycles. Parts with heavier cross sections require longer exposure at heat to attain sufficient temperature internally. Carefully consider part geometry. Consult Hernon® Technical Service for specific process requirements.
    SKU: ACTIVATOR FOR HPS RESINS
    *
    Digital Downloads

     

    Gel Time
    Gel time** at 90oC with HPS 994R: 4 to 10 minutes
    **99.8 grams of HPS 994R mixed with with 0.2 grams of HPS Initiator 4322
    Activation Instructions
    HPS 994R can be activated using the following mixing proportions:
    HPS 994R HPS Initiator 4322
    1 Gallon (3.78Kg) 7.6 grams
    5 Gallons (18.9Kg) 37.8 grams
    Mix thoroughly until the initiator is completely dissolved before use.
    Please see technical data sheets for HPS resins for Activation instructions and Directions for Use.

    Product tags

    Need more product information? Contact Us