Equipment

The Sureshot® 3510 precision dispensing valve accurately controls the application of low viscosity fluids. The 3510 valve provides repeatable precision micro-dispensing with a cycle rate of over 500/min. Users can adjust the fluid flow by changing pressure control. Two needles are available for use with the 3510 valves with orifice dimensions of 0.01? and 0.007?. Easily fix a bent or cured tip by replacing the stainless steel dispensing needles. Simply unscrew the damaged or clogged needle and screw in the replacement. With a small size and low weight, the valve can be placed into narrow fittings and is a match for retrofitting. The 3510 replaces the 3500 valve previously offered.

The Sureshot® 4000 series dispensing valve system accurately controls the application of most medium and high viscosity fluids. The Sureshot® 4000 utilizes an aluminum piston for high pressure dispensing with a maximum of 500 PSI. A Teflon® piston which is designed for anaerobic gasket re-placers is also available. With positive shutoff and a snuff-back stop response, this system ensures minimal waste of material and reduces the environmental impact of your manufacturing process. Offered in multiple configurations to assist with retrofitting efforts, the Sureshot® 4000 is available in either a straight or 90o model and supports Hernon’s disposable dispensing tips. The compact size and low weight allow for greater placement and system design options when compared to heavier and more bulky valve systems. Hernon’s family of pressure reservoirs can be added to the dispensing system to ensure lengthy continuous operation. The Rambo®, a ram powered pressure reservoir is particularly effective in this pairing as it can produce a dispensing pressure of up to 350 PSI allowing the operator to utilize more of the Sureshot® 4000’s 0-500 PSI operational pressure rating.

Tooling kits to adapt the Hybrid 1000 bowl feeder for different calibers and types of ammunition.

The Ultracure® 1100 is a benchtop, high output UV LED curing conveyor designed to quickly and completely cure UV adhesives and sealants.

Ultracure 25, LED flashlight, 365nm 5W LED, USB Model w/rechargeable battery 220MAH/3.7V

The Ultracure® 6 is a high output LED UV Curing system designed to quickly and completely alter the physical properties of a UV reactive bonding or sealing agent. This system has built-in power regulation and over-temperature protection and is fan cooled to ensure consistent long term operation while outputting a maximum intensity UV light. The Ultracure® 6 can be installed alone or in series to produce a UV light bath across manufacturing conveyor belts.

The Ultracure® 7 is a high output of 2.5 W. per cm2 LED UV Curing system with no intensity degradation over the LED lifecycle. The Ultracure® 7 is liquid-cooled and intrinsically safe. It boasts an impressive 17000+ hours of LED life or almost six years running eight hours a day. The Ultracure® 7 requires no replacement lamps or filters and can provide consistent high-intensity UV light instantly with no warm-up time required. The Ultracure® 7 is water and dustproof to IP65 standards and is suited for a wide variety of manufacturing environments. The compact size dimensions at 2” x 1.28” x 4.8” ensure that positioning will not be a problem and multiple curing systems can be installed in tandem or stacked to get the desired effect.

The Ultracure® 8 is a high output 2.5 W. per cm2 LED UV Curing system designed to quickly and completely alter the physical properties of a UV reactive bonding or sealing agent. The Ultracure® 8 includes a unique focused lens that concentrates the ultraviolet light to provide an extended curing range of 3x the standard distance of an Ultracure® 6 while maintaining the light intensity needed to produce a curing reaction. With a UV array of 8mm x 50.4mm, the compact design with extended range offers a larger array of mounting options and designs. Each Ultracure® 8 unit can produce 17,000+ hours of LED life and requires no replacement lamps or filters.

The Ultracure® 9 is a high output 2.5 W. per cm2 LED UV curing system designed to quickly and completely alter the physical properties of a UV reactive bonding or sealing agent. The Ultracure® 9 includes a unique focused lens that concentrates the ultraviolet light to provide an extended curing range of 3x the standard distance of an Ultracure® 6 while maintaining the light intensity needed to produce a curing reaction. With a UV array of 8mm x 50.4mm, the compact design with extended range offers a larger array of mounting options and designs. Each Ultracure® 9 unit can produce 17,000+ hours of LED life and requires no replacement lamps or filters. A high-speed fan keeps the unit cool during extended operation.

VALVE CLAMP; 3/4" X 3/4" X1 ¼"